Bamboo assembly is a very useful activity. It allows you to make marquees, garden sheds, scaffolding and bridges. Based on this fact, if you want to know the techniques for assembling bamboo together, then the following may interest you.
Gather the Accessories to Assemble Bamboos Together
To assemble the bamboos together, the first thing to do is to gather the necessary materials . Then start by providing you with very dry bamboo with a humidity of less than 15%. If you do not have dry bamboo, you can dry the damp ones you have.
Next, you must have strong ropes in your possession . It is therefore not recommended to use nails to assemble bamboo. Furthermore, you must have healthy sections of bamboo at your disposal that are not full of insects and cracks. It is therefore appropriate to use bamboo that is more than three years old. On the other hand, equip yourself with a saw and preferably one made in Japan. It allows you to cut dry bamboo culms well.
Tie a Knot on the First Bamboo
After gathering all the necessary accessories and materials, start by tying a knot with the rope on the first bamboo . You have the choice of making several types of knots. It's up to you to choose the one that suits you best.
For example, you can tie a bowline knot or a capstan knot. In any case, it remains useful for the end of the rope to be more than 15 cm long at the end . This allows you to make the knot finishing the assembly. It is worth knowing that you must have a 4 meter long rope.
Connect the Second Bamboo to the First with the Rope
The next step to assemble bamboos together would be to position the first bamboo on the second in the form of a cross . Then you pass the rope under the latter and bring it back above the first.
After that, pass the rope again under the second bamboo and then bring it back and pass it over the first. So, when you want to pass the rope again below the second bamboo , you begin the second phase. Repeat the steps 4 times in a row.
Make sure that the passage of the ropes does not overlap one under the other. To finish, circle around the rope passages and repeat the operation 4 times. Then secure the assembly by tying a knot around the passages.
Reinforce The Assembly With Wire Ties
Once the knot is correctly tied, you can reinforce the assembly using wire ties . This step is essential to guarantee the robustness and longevity of your creation.
To do this, place the wire ties around the different points of intersection between the assembled bamboos. Be sure to tighten enough so that the bamboos are held in place without being crushed.
There is also another less common but equally effective method for reinforcing the assembly: using silicone sealant . To do this, apply a thin layer of putty to each point of intersection between the bamboos and leave to dry for several hours until the putty has hardened.
Be careful though, this technique is not suitable for all creations because it can alter their appearance or natural texture .
Before using your assembled bamboo constructions, remember to check that all the knots are tight and that the whole thing holds together securely. In the event of any weakening at the intersection points after prolonged use or following bad weather, do not hesitate to repeat these steps in order to consolidate your work.
Use a Special Glue for a More Durable Fixing
If you are looking for an even stronger fixing for your bamboo creations, using a special glue can be a good option. This method is particularly recommended for projects that require permanent assembly or for long-term uses.
There are several types of glue suitable for bamboo, each with its own advantages and disadvantages. Among them, epoxy glue , very resistant to shock and humidity, is often the preferred choice.
Before applying the glue , you must thoroughly clean the surfaces of the bamboos you plan to assemble. However, avoid using sandpaper or any other abrasive material that could damage the natural surface of the bamboo.
Then apply the glue to each point of intersection between the different elements, taking care not to overdo it in order to avoid any visible excess once everything is dry. In general, a few drops are more than enough!
Once all the points are glued together, hold each intersection firmly for a few minutes (usually 5-10 min) until the glue gradually takes on its permanent consistency.
As with all methods involving any chemical, always remember to take care of your safety during this step by wearing appropriate gloves. Carefully follow the instructions provided by the manufacturer to ensure safe and effective use of your glue.
Note that using such a method may limit the flexibility of the assembled bamboo. This is often used for decorative creations, rather than useful ones like shelters or lightweight structures.
0 Comments